R80/7 Reattaching Transmission

Discuss all things 1970 & later Airheads right here.
Post Reply
Rob Frankham
Posts: 1338
Joined: Thu Aug 26, 2010 2:11 pm
Location: Scotland UK, 20 miles from civilisation up a dead end road!
Contact:
Contact Rob Frankham

Re: R80/7 Reattaching Transmission

Post by Rob Frankham »

They get in the way and are unnecessary if you have the right diameter tube. As long as the hose is ethanol resistant, it'll have no effect.

Rob
ImageImageImage
Top
JonnyH1
Posts: 9
Joined: Thu Aug 01, 2024 10:33 am

Re: R80/7 Reattaching Transmission

Post by JonnyH1 »

Thanks Rob. Done
Top
User avatar
gspd
Posts: 1116
Joined: Tue Aug 03, 2010 8:04 pm

Re: R80/7 Reattaching Transmission

Post by gspd »

JonnyH1 wrote: ↑Wed Apr 16, 2025 4:49 am I replaced the fuel line (with proper metric line).
Where did you get the proper gas line?
Is yours 6mm or 7mm ID?
The stuff EME sells is 6mm ID and very hard to push on and pull off, like when you want to remove the tank, etc.
I'm looking for the 7mm ID (12mm OD) but without the cloth covering.
Mechanic from Hell
"I remember every raging second of it...
My bike was on fire, the road was on fire, and I was on fire.
It was the best ride ever!"
Top
Post Reply

Return to “Post 1970 Airheads”