Page 1 of 1
Recognised modification?
Posted: Thu Apr 30, 2026 1:01 pm
by JohnT
- small.jpg (142.54 KiB) Viewed 183 times
Has anyone on the Forum carried out this carburettor change on a 600?
If so what chock size did you use?
Re: Recognised modification?
Posted: Thu Apr 30, 2026 1:33 pm
by Rob Frankham
It's been done many times. The 32mm choke Bings from a R65 seem to be favoured. Not done it myself so can't comment further. Just bear in mind that you need to change the stubs that screw into the head...
Rob